ME 330 - Engineering Materials

Fall 2021

TitleRubricSectionCRNTypeHoursTimesDaysLocationInstructor
Engineering MaterialsME330AB136528LAB00800 - 0950 M  201 Talbot Laboratory Koumudhi Deshpande
Ganesh Ananthakrishnan
Engineering MaterialsME330AB236540LAB01200 - 1350 M  201 Talbot Laboratory Kai Zhou
Gorkem Gengor
Engineering MaterialsME330AB436570LAB00800 - 0950 T  201 Talbot Laboratory Hyeongkeun Kim
Kai Zhou
Engineering MaterialsME330AB536582LAB01500 - 1650 T  201 Talbot Laboratory Md Muntasir Alam
Sagar Chaudhary
Engineering MaterialsME330AB736594LAB00800 - 0950 W  201 Talbot Laboratory Ganesh Ananthakrishnan
Koumudhi Deshpande
Engineering MaterialsME330AB836600LAB01200 - 1350 W  201 Talbot Laboratory Fazlur Rashid
Gorkem Gengor
Engineering MaterialsME330AB936607LAB01500 - 1650 W  201 Talbot Laboratory Partha Kumar Das
Md Abdul Hamid
Engineering MaterialsME330ABA50299LAB00800 - 0950 R  201 Talbot Laboratory Sanbera Piuly
Kai Zhou
Engineering MaterialsME330ABB62123LAB01500 - 1650 R  201 Talbot Laboratory Gorkem Gengor
Sagar Chaudhary
Engineering MaterialsME330ABC63416LAB01700 - 1850 T  201 Talbot Laboratory Ronald Tao
Md Abdul Hamid
Engineering MaterialsME330ABD36559LAB01700 - 1850 R  201 Talbot Laboratory Md Abdul Hamid
Ganesh Ananthakrishnan
Engineering MaterialsME330AL136512LEC41100 - 1220 T R  151 Loomis Laboratory Sidharth Ravi
Engineering MaterialsME330AL236518LEC41230 - 1350 T R  151 Loomis Laboratory Lili Cai
Engineering MaterialsME330OL136588OLC4 -    Sidharth Ravi
Engineering MaterialsME330OLB63418OLB0 -    Koumudhi Deshpande

Official Description

Structures of polymers, metals, and ceramics as the basis for their mechanical behavior. Manipulation of structure through such processes as heat treatment and solidification. Mechanisms of material failure in service (yielding, fracture, fatigue, creep, corrosion, and wear) and simple design techniques to avoid these failures. Strategies for materials selection in design. Course Information: Credit is not given for both ME 330 and either CEE 300 or MSE 280. Prerequisite: CHEM 102 and TAM 251. Class Schedule Information: Students must register for one lab and one lecture section.

Detailed Course Description

Structures of polymers, metals, and ceramics as the basis for their mechanical behavior. Manipulation of structure through processes such as heat treatment and solidification. Mechanisms of material failure in service (yielding, fracture, fatigue, creep, corrosion, wear) and simple design techniques to avoid these failures. Strategies for material selection in design. Prerequisite: TAM 251, CHEM 102 or equivalent. Students may not receive credit for both this course and MSE 280, TAM 324, or CEE 300. (The latter two courses are cross-listed.) 4 undergraduate hours.

TOPICS:

1. Mechanics of materials: properties of materials (mechanical, thermal, optical, electrical); bonding, properties and classification of materials, crystallography; dislocations and vacancies; work hardening and plasticity; forming processes (wire drawing, rolling, forging, annealing, recrystallization, grain growth)

2. Polyphase materials: phase diagrams, strengthening mechanisms, nucleation, diffusion and growth, heat treatment processes (solution, quenching and heat transfer, aging, IT and CCT diagrams, commercial processes)

3. Solidification: cast micro- and macrostructures, solidification processing (casting, solidification time, stresses of solidification), welding and joining processes

4. Polymers: polymer structure (Tg, crystallization, morphology, etc.), polymer processing (molding, extrusion), effect on structure

5. Composites: high performance fibers (glass, carbon, aramid), matrix materials and the role of the matrix, stiffness and strength estimates?aligned continuous fibers, fiber orientation and length effects, other composites, composites processing

6. Ceramics: ceramic microstructures, ceramics processing (particulate, slip casting, sintering, glass processing)

LABORATORY TOPICS:

1. Hardness, strength and compression

2. Tensile stress-strain relations

3. Cold work and Annealing

4. Phase diagrams and Casting

5. Heat Treatment of Steel

6. Hardenability of Steels

7. Toughness and Impact

8. Welding and Allied Processes

9. Polymer and Composite Materials

10. Corrosion

ME: Required.

EM: TAM 324 required instead.

Last updated

1/21/2021