Journal
Articles
Hilldore, A., A.
Wojtowicz, and A. J. Wagoner Johnson, “Quantification of Soft
Tissue on Hydroxyapatite Scaffolds using Micro-ct,” Journal of
Biomedical Materials Research, 2007, in press.
Woodard, J., A.
Hilldore, S. Lan, C.J. Park, A. W. Morgan, J. C. Eurell, S.G. Clark,
M.B. Wheeler, R. Jamison, and A. J. Wagoner Johnson, “The
Mechanical Properties and Osteoconductivity of Hydroxyapatite Bone
Scaffolds with Multi-scale Porosity,” Biomaterials, 28,
45-54, 2007.
Wagoner Johnson, A. J.,
N. Juan Serrano, A. W. Morgan, R. Jamison, Y. B. Choy,
H. Choi, K. (Kevin) Kim, and F. DeCarlo, “Imaging Therapeutic
Proteins in Gelatin for Controlled Drug Release,” Macromolecular
Symposia, 227, 295-305, 2005.
Wagoner
Johnson, A. J., R. F. Hamilton, H. Sehitoglu, H. J. Maier, G.
Biallas, Y. I. Chumlyakov, and H. S. Woo,
“Analysis of Multistep Transformations in Single Crystal NiTi,”
Metallurgical and Materials Transactions A, 36:4,
919-928, 2004.
Yu, N., A.
Polycarpou, and A. J. Wagoner Johnson, “Measuring Mechanical
Properties in Fine Wire Cross-Sections Used in Medical Devices,”
Journal of Biomedical Materials Research, 70B:1,
106-113, 2004.
Efstathiou, C., H. Sehitoglu, A. J. Wagoner Johnson, R. F.
Hamilton, H. J. Maier, and Y. Chumlyakov, “Large Reduction in
Critical Stress in Co–Ni–Al upon Repeated Transformation,”
Scripta Materialia, 51:10, 979-985, 2004.
Wagoner
Johnson, A. J., K. S. Kumar, and C. L. Briant, “Deformation
Mechanisms in Ti-6Al-4V/TiC Composites,” Metallurgical and
Materials Transactions, 34A, 9, 1869-1877, 2003.
Wagoner
Johnson, A. J., C. L. Briant, K. S. Kumar, and C. W. Bull, “The
Influence of Microstructure and Strain Rate on the Compressive
Deformation Behavior of Ti-6Al-4V,” Metallurgical and Materials
Transactions, 34A, 2, 295-306, 2003.
Carins, D. R.,
G. M. Genin, A. J. Wagoner, C. L. Briant, and G. P. Crawford,
“Amplified Strain-Rate Dependence of Deformation in
Polymer-Dispersed Liquid-Crystal Materials,” Applied Physics
Letters, 75:13, 1872-1874, 1999.
Conference
Articles
Wagoner
Johnson, A. J., C. L. Briant, and K. S. Kumar, “Strengthening
Mechanisms in Ti-6Al-4V/TiC Composites,” Proceedings from the
International Conference On Numerical Methods in Industrial Forming
Processes, Columbus, OH, June 13-17, 2004.
Wagoner
Johnson, A. J., A. Wojtowicz, J. Dellinger, R. Jamison, S.
Stock, and K. Ignatiev, “3D Tissue Distribution Patterns
Characterized by Micro-CT,” 2003 Materials Research Society Fall
Meeting, Architecture and Application of Biomaterials and
Biomolecular Materials, EXS-1-C, eds., A. Plant, A.
Chilkoti, A. E. Baron, J. Wong, 2004 (peer reviewed).
Sehitoglu, H.,
R. Hamilton, H. J. Maier, A. Wagoner-Johnson, H. Woo, and Y.
Chumlyakov, “Detwinning and Hysteresis in NiTi Alloys,”
Proceedings from New Trends in Phase Transformation and their
Applications to Smart Structures, Nato International Workshop
Metz, France, April 23-26, 2002.
Wagoner Johnson, A. J.,
C. L. Briant, K. S. Kumar, and C. W. Bull, “Compressive Behavior of
Ti-6Al-4V/TiC Layered Composites: Experiments and Modeling,”
Proceedings from The Minerals, Metal and Materials Society (TMS)
Annual Meeting, New Orleans, LA, 261-271, 2001.
Wagoner Johnson, A. J.,
C. L. Briant, K. S. Kumar, and C. W. Bull, “The Effect of Strain
Rate on the Compression Behavior of Ti-6Al-4V/TiC Composites,”
Proceedings of the Eighth International Symposium on Plasticity,
Whistler, British Columbia, Canada, 600-602, 2000.
Invited
Lectures
Wagoner
Johnson, A. J., “BONE TISSUE ENGINEERING: Fabrication,
Mechanical Properties, and Other Considerations for Load-bearing
Bone Scaffolds,” Department of Bioengineering, Bioengineering 120,
University of Illinois at Urbana-Champaign, November 2006.
Wagoner
Johnson, A. J., “Fabrication, Mechanical Properties, and
Microstructural Considerations for Bone Ingrowth in Load-bearing
Hydroxyapatite Scaffolds,” Department of Materials Science and
Engineering, University of Michigan, November 2006.
Wagoner
Johnson, A. J., “Mechanics and Imaging of Biomaterials for
Applications in Bone Tissue Engineering,” Department of Mechanical
Engineering, Purdue University, April 2005.
Wagoner
Johnson, A. J., “Mechanics and Imaging of Biomaterials for
Applications in Bone Tissue Engineering,” Department of Mechanical
Engineering, University of Colorado at Boulder, March 2005.
Wagoner
Johnson, A. J., “Mechanics and Imaging of Biomaterials for
Applications in Bone Tissue Engineering,” Department of Mechanical
Engineering, Virginia Tech, March 2005.
Wagoner
Johnson, A. J., “Mechanics and Imaging of Biomaterials for
Applications in Bone Tissue Engineering,” Department of Mechanical
and Industrial Engineering, University of Illinois at
Urbana-Champaign, February 2005.
Wagoner
Johnson, A. J., N. Juan Serrano, A. Hilldore, A. Wojtowicz, A.
Whittington Morgan, J. Dellinger, R. Jamison, Y. B. Choy,
H. Choi, K. (Kevin) Kim, and F. DeCarlo, “Imaging therapeutic
proteins and bone/soft tissue composites using Micro-CT,” Imaging
Technology Group Forum, Beckman Institute, University of Illinois at
Urbana-Champaign, October 2004.
Wagoner
Johnson, A. J., C. L. Briant, K .S. Kumar, and C. W. Bull,
“Micro-mechanical Deformation and Failure Mechanisms in Ti-6Al-4V/TiC
Particulate and Layered Composites,” Department of Manufacturing
Engineering, Boston University, April 2001.
Wagoner
Johnson, A. J., C. L. Briant, K .S. Kumar, and C. W. Bull,
“Deformation and Failure Mechanisms of Ti-6Al-4V/TiC Particulate and
Layered Composites,” Department of Theoretical and Applied
Mechanics, UIUC, April 2001.
Wagoner
Johnson, A. J., C. L. Briant, K .S. Kumar, and C. W. Bull,
“Deformation and Failure Mechanisms of Ti-6Al-4V/TiC Particulate and
Layered Composites,” Pratt and Whitney, Hartford, Connecticut, April
2001.
Other
Presentations
Materials Research Society Fall Meeting, Boston, MA, November
2004
Polymer Networks Conference,
National Institutes of Health, Bethesda, MD, August 2004
7th World Congress on Biomaterials, Sydney
Australia, May 2004, (presented by student).
40th Annual Technical Meeting, Society of Engineering Science, Ann
Arbor, MI, October 12-15, 2003.
TMS Annual
Meeting, San Diego, CA, March 2003.
US National Congress
of Theoretical and Applied Mechanics, Blacksburg,
VA, June 2002.
TMS Fall
Meeting, 1999.
|
